Boemong bona ba leholimo bo lulang bo fetoha, bo sa tsitsang u hloka moetsi ea nang le bokhoni le boiphihlelo ho fokotsa tšitiso le ho fana ka liphetho. Setsi sa rona sa United States se thehiloeng, ITAR se ngolisitsoeng ka nepo se fana ka thepa e thehiloeng ho tharollo, ea boleng bo holimo bakeng sa morero oa hau oa sefofane kapa ts'ireletso. Re utloisisa indasteri hobane batho ba rona ba tsoa indastering.

  • NADCAP Special Process e laoloang ketane ea phepelo
  • Litšebelisano tsa nako e telele le ketane ea phepelo ea NADCAP ho kenyeletsoa ho etela khafetsa sebakeng sa marang-rang le liphuputso tsa ka hare
  • Libaka tse bonoang haholo, tse khethetsoeng merero ea DOD
  • Lits'ebetso tsa boleng bo holimo, ho sila, ho reteleha le tse ikhethang tse nang le mamello ho ± 0.0001
  • E qaqileng, e pharaletseng, e thehiloeng likamanong tsa akhaonto / tsamaiso ea morero
  • Likhopolo tse thehiloeng ho tharollo, tse nang le bopaki ba liphoso
  • Pelehi ea nako
Iteanye le rona Hona joale

Litifikeiti tsa Bracalente

  • AS9100D
  • ITAR e ngolisitsoe ka molao
  • ISO 9001: 2015
  • IATF 16949: 2016

dikarolo

7075/6061 aluminium, tšepe ea motsoako, motsoako oa sefofane, tšepe e nang le tšepe le mocheso o phahameng oa mocheso.

7/8 GUNLIGHT | MILILA MOLEMO | MILILA SETHUNYA | MILILA SETHUNYA | MILILA LESENYA LA SETHUNYA | MILILA LESENYA LA SETHUNYA | MILILA MOUNT W/ SEKURU SA THUMB | TSIETSO MOUNT W/ SEKURU SA THUMB | TSIETSO MOUNT ERIL | MILILA RAIL THABA | MILILA SEKOPO TABA | MILILA SCOPE MOUNT Swinging Arm | MILILA THUMBSCRE | SOSOA LAHLETSO HOUSE | MILILA MANANE | PHETOA/LOI SS SHAFT | SOSOA MANANE | MILILA MANANE | MILILA MANANE | MILILA SS END CAP | PHEKOA/MOLO

bokgoni

Ho lokisa mabone, lilemo tse 70+ tsa tlhahiso e nepahetseng, ho fumana chelete lefatšeng ka bophara le ho se sebetse, re na le bokhoni le likamano tse nang le boiphihlelo marang-rang a rona ho sebetsana le eng kapa eng eo projeke ea hau e e hlokang. Bracalente Edge ™ e re lumella ho sebelisa litekanyetso tse phahameng ka ho fetisisa tsa theknoloji, boqapi, boleng le litšenyehelo tse fanang ka nako, nako le nako.

CNC siloa

CNC siloa

Setsi sa rona sa tlhahiso ea mabone, se fana ka lits'ebeletso tse nepahetseng tsa ho sila tsa CNC tse ka amohelang litlhoko tse thata ka ho fetesisa. Setsi sa rona sa lisebelisoa se kenyelletsa 3, 4, le 5-axis Mills tse nang le likarolo tse fapaneng tsa ho ntlafatsa ts'ebetso. Re sebetsa ka ho khetheha ho sila likaroloana tse nyane ho isa ho tse mahareng ka prototype ho isa meqolong e mengata ea tlhahiso.

Re khona ho mamella mamello e haufi joalo ka 0.0005 ″

Ithute haholoanyane
retelehela

CNC Turning

Ka ho sebelisa liroboto tse ikemetseng le lisebelisoa tsa ho hlahloba lisebelisoa ho ntlafatsa bophelo ba lisebelisoa, re khona ho hlahisa likotoana tse phethiloeng ka botlalo ka maemo a holimo. Pakeng tsa meaho ea rona e 'meli ea tlhahiso e fokolang United States le Chaena, re sebelisa Mechini e Fetolang ea CNC e fetang 75.

Re khona ho mamella mamello e haufi joalo ka ± 0.00025 ″

Ithute haholoanyane
MMC2

Sistimi ea MMC2

Sistimi ea rona ea MMC2 e hokahanya litsi tsa machining tse otlolohileng ho sistimi e ikemetseng ea pallet ho ntlafatsa tlhahiso. Ka thekenoloji le mekhoa e mecha tsamaiso e fana ka lisebelisoa tse hahiloeng ka mokhoa o ikemetseng, tlhahiso ea ho khantša (LOOP), katleho le ho feto-fetoha ha maemo, ntlafatso ea litšenyehelo le ho fokotsa nako e behiloeng bakeng sa moreki.

Ithute haholoanyane

Balekane ba Boemo bo Phahameng

E FETILENGKAOFELAE LATELANG